L200 Owners Club

The Forum => Public/Initial Posting Area. => Topic started by: trojancrew on 01 August, 2020, 20:50:13 PM



Title: Not holding idle?
Post by: trojancrew on 01 August, 2020, 20:50:13 PM
Hi all,
So yesterday all was well - this morning however the truck won’t idle?
Started fine then slowly went down to 500rpm and started juddering so I switched it off.
Started it a little while later, same thing but drove fine?
Any ideas, things to check or generally give me some clues please.
Thanks all 🤞🏻


Title: Re: Not holding idle?
Post by: trojancrew on 05 August, 2020, 21:33:22 PM
So I’ve traced the problem to the air con.
 The switch was flickering when in the off position and normal when on.
Took the 30a fuse out of the engine bay fuse box and the idle seems normal again.
 The air con also seems to work as normal??
The fuse was ok too - anyone good with electrical gremlins?