KS International - L200 Forum sponsor
Welcome, Guest. Please login or register.
15 June, 2021, 18:53:06 PM

Login with username, password and session length
155944 Posts in 18335 Topics by 12181 Members
www.L200.org.uk
Full site access is now FREE - Owners Club cards are required for discounts with our sponsors.

Owners Club card £2
Owners Club card & keyring £3
Owners Club card, keyring & mug £5
Thermal mug costs on request.

No record of membership will  be recorded
Home L200 Forum L200 Forum & Club Info Buy Owners Club Merchandise at the L200 Forum L200 Forum Gallery L200 Forum Information page Login Register L200 Forum Links Page L200 Forum email
Looking to join the Mitsubishi L200 Owners Club ? - Joining info here - - - - - - - Want to help our charities ? - Shop at Amazon.co.uk through this link
L200 Owners Club Forum - Facebook Page A-Plan L200 insurance - L200 Forum sponsor
+  L200 Owners Club
|-+  The Forum
| |-+  Public/Initial Posting Area.
| | |-+  tappet clearance
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: tappet clearance  (Read 1052 times)
danby
Owners Club member
**
Offline Offline

Gender: Male
Posts: 231


« on: 01 February, 2021, 14:30:34 PM »

What is tappet clearance on 4d56 engine?
Logged

2004 54 double cab 4life blue/silver. Sometimes dirty, usually very dirty.
Supersnail
Owners Club member
**
Offline Offline

Gender: Male
Posts: 610

Im always in the poo its only the depth that varie


« Reply #1 on: 03 February, 2021, 19:21:54 PM »

Its either .015 or .15 can't remember which.
Logged

2001 Black\Grey double cab.K&N air filter
barnstormer
Owners Club member
**
Offline Offline

Gender: Male
Posts: 504


« Reply #2 on: 04 February, 2021, 17:21:38 PM »

 I found this from a previous post.   

"Re: Valve Clearances
? Reply #3 on: 16 May, 2008, 02:05:32 AM ?
Reply with quote
Sorry for the slow response.

Page 11B-8, valve clearances are 0.25mm (= 0.0098 inch or 10 thou)."

I seem to remember that it is specified that the clearances should be done hot at 0.008" (0.20 mm) or a basic setting at 0.010" ( 0.25 mm) cold.

Setting valves hot is nonsense IMHO, by the time you get to the last one the engine would be cold so I set mine at 0.25 mm cold.
Logged

I'm not over the hill. I'm still trying to get up it!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.1 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!